5/8" DMC & DMS
This is a low profile unit and is easily installed. It can be utilized ball up or down. Bolt down cover is available for stability. Disk-mount ball – the easiest installation just by dropping these units into your application, can be used with or without the bolt down covers.
*5/8 DMC- No nylon seal
| Part # | Ball Material | Housing | Load Capacity |
|---|---|---|---|
| 5/8 DMC | Carbon Steel | Carbon Steel (zinc plated) | 40 lbs. |
| 5/8 NDMC | Nylon | Carbon Steel (zinc plated) | 40 lbs. |
| 5/8 DMS | Stainless Steel | Stainless Steel | 75 lbs. |
| 5/8 NDMS | Nylon | Stainless Steel | 40 lbs. |
DMC & DMS
This low profile ball unit has a nylon wiper seal and is easy to install. The unit can be utilized ball up or ball down. Heavy duty bolt down cover is also available.
| Part # | Ball Material | Housing | Load Capacity |
|---|---|---|---|
| DMC | Carbon Steel | Carbon Steel (zinc plated) | 75 lbs. |
| NDMC | Nylon | Carbon Steel (zinc plated) | 75 lbs. |
| DMS | Stainless Steel | Stainless Steel | 125 lbs. |
| NDMS | Nylon | Stainless Steel | 75 lbs. |
5/8 DMC- No nylon seal
5/8" DMC & DMS Cover
The DMC bolt down cover allows the ball transfer unit to stay in place when uneven material is pulled across.
| Part # | Material |
|---|---|
| 55269 | Carbon Steel |
| 55269S | Stainless Steel |
DMC & DMS Cover
The DMC bolt down cover allows the ball transfer unit to stay in place when uneven material is pulled across.
| Part # | Material |
|---|---|
| 55270 | Carbon Steel |
| 55270S | Stainless Steel |