FMC & FMS
This unit has a two-hole flange base for easy mounting. Hardened ball cup and sealed protective cover permit low torque and long life. This unit can be utilized ball up or ball down.
Units are available with any configuration of carbon steel, stainless steel and nylon.
| Part # | Ball Material | Housing | Load Capacity |
|---|---|---|---|
| FMC | Carbon Steel | Carbon Steel (zinc plated) | 75 lbs. |
| NFMC | Nylon | Carbon Steel (zinc plated) | 75 lbs. |
| FMS | Stainless Steel | Stainless Steel | 125 lbs. |
| NFMS | Nylon | Stainless Steel | 75 lbs. |
11/16" OB-FMC
This unit has a two-hole flange base for easy mounting. This unit can be utilized ball up, ball down or at any angle, unless noted.
| Part # | Ball Material | Housing | Load Capacity |
|---|---|---|---|
| 11/16 OB-FMC | Carbon Steel | Black Oxide Finished Carbon Steel | 90 lbs. |
OB-FMC
This unit has a two-hole flange base for easy mounting. This unit can be utilized ball up, ball down or at any angle, unless noted.
| Part # | Ball Material | Housing | Load Capacity |
|---|---|---|---|
| OB-FMC | Carbon Steel | Black Oxide Finished Carbon Steel | 135 lbs. |
BD-R-FMC
This ball transfer unit of carbon steel component is intended only as a basic guide for caster or ball transfer selection. Transfers can be used ball up, ball down or at any angle. Product can be pop riveted.
| Part # | Ball Material | Housing | Load Capacity |
|---|---|---|---|
| OB-FMC | Carbon Steel | Black Oxide Finished Carbon Steel | 135 lbs. |
1 1/8" BD-R-FMC
This ball transfer unit of carbon steel component is intended only as a basic guide for caster or ball transfer selection. Transfers can be used ball up, ball down or at any angle. Product can be pop riveted.
| Part # | Ball Material | Housing | Load Capacity |
|---|---|---|---|
| 1 1/8 BD-R-FMC | Carbon Steel | Black Oxide Finished Carbon Steel | 180 lbs. |
1 1/4" BD-R-FMC
This ball transfer unit of carbon steel component is intended only as a basic guide for caster or ball transfer selection. Transfers can be used ball up, ball down or at any angle. Product can be pop riveted.
| Part # | Ball Material | Housing | Load Capacity |
|---|---|---|---|
| 1 1/4 BD-R-FMC | Carbon Steel | Black Oxide Finished Carbon Steel | 225 lbs. |
1 1/2" EFMC & EFMS
With a 250-pound load capacity, this heavy duty unit is available in all-carbon steel, all-stainless steel, and as a carbon or stainless housing with a nylon main ball. It has a four-hole flange to facilitate easy installation. Can be utilized ball up or ball down.
Neoprene pads available to reduce shock, vibration and noise.
| Part # | Ball Material | Housing | Load Capacity |
|---|---|---|---|
| 1-1/2 EFMC | Carbon Steel | Carbon Steel (zinc plated) | 250 lbs. |
| 1-1/2 NEFMC | Nylon | Carbon Steel (zinc plated) | 250 lbs. |
| 1-1/2 EFMS | Stainless Steel | Stainless Steel | 350 lbs. |
| 1-1/2 NEFMS | Nylon | Stainless Steel | 250 lbs. |
1 1/2" FMC & FMS
This heavy duty unit has a four-hole flange to facilitate easy installation. The nylon seal prevents entry of dirt and foreign matter while removable armored protective cover provides ultimate protection against damage. This unit can be utilized ball up only.
Neoprene pads available to reduce shock, vibration and noise.
| Part # | Ball Material | Housing | Load Capacity |
|---|---|---|---|
| 1-1/2 FMC | Carbon Steel | Carbon Steel (zinc plated) | 250 lbs. |
| 1-1/2 NFMC | Nylon | Carbon Steel (zinc plated) | 250 lbs. |
| 1-1/2 FMS | Stainless Steel | Stainless Steel | 350 lbs. |
| 1-1/2 NFMS | Nylon | Stainless Steel | 250 lbs. |